Installing The Device By Using Front And Rear Mounting Brackets - H3C WX5540H Installation Manual
Hide thumbs
Also See for WX5540H:
- User configuration manual (57 pages) ,
- Configuration manual (11 pages) ,
- Installation, quick start (4 pages)
Table of Contents
Advertisement
Installing the device by using front and rear mounting brackets
1.
Wear the ESD wrist strap and make sure the rack is sturdy and is reliably grounded.
2.
Use a front mounting bracket to mark the cage nut installation position on the front rack posts.
Install cage nuts.
Figure 7 Installing cage nuts
3.
Use the screws supplied with the front mounting brackets to secure the front mounting brackets to
both sides of the device.
Figure 8 Attaching the front mounting brackets to the device
4.
Attach the load-bearing screws supplied with the rear mounting brackets to both sides of the
device.
The load-bearing screws will be in close touch with the rear mounting brackets to support the
device.
1
2
3
10
Advertisement
Table of Contents
