Installation Flow; Mounting The Device On A Workbench - H3C WX5540H Installation Manual
Hide thumbs
Also See for WX5540H:
- User configuration manual (57 pages) ,
- Configuration manual (11 pages) ,
- Installation, quick start (4 pages)
Table of Contents
Advertisement
Installation flow
Figure 3 Installation flow
Mounting the device on a workbench
If a standard 19-inch rack is not available, you can place a device on a clean, flat workbench, as follows:
1.
Clean the recessed areas on the chassis bottom.
2.
Attach the four rubber feet to the recessed areas on the chassis bottom.
3.
Place the device on the workbench.
IMPORTANT:
Do not place heavy objects on the device.
8
Advertisement
Table of Contents
