Appearance Care - Hyundai H-1 2005 Owner's Manual

5

APPEARANCE CARE

APPEARANCE CARE
2
F010A01P-GAT
In order to maintain the value of your
vehicle, it is necessary to perform
regular maintenance using the proper
procedure. Be sure to maintain your
vehicle in compliance with any perti-
nent environmental pollution control
regulations.
Carefully select the materials to be
used for washing, etc., to be sure that
they do not contain corrosives; if in
doubt, contact an authorized HYUNDAI
dealer for assistance in the selection
of these materials.
F010B01P-GAT
Washing
Chemicals contained in the dirt and
dust picked up from the road surface
can damage the paint coat and body of
your vehicle if left in prolonged con-
tact.
Frequent washing is the best way to
protect your vehicle from this damage.
This will also be effective in protecting
it from environmental elements such
as rain, snow, salt air, etc.
Do not wash the vehicle in direct sun-
light.
Park the vehicle in the shade and
spray it with water to remove dust.
Next, using an ample amount of clean
water and a vehicle washing brush or
sponge, wash the vehicle from top to
bottom.
Use a mild vehicle washing soap if
necessary. Rinse thoroughly and wipe
dry with a soft cloth. After washing the
vehicle (including washing in an auto-
matic vehicle wash), carefully clean
the joints and flanges of the doors,
hood, etc., where dirt is likely to re-
main.
F010C01P-GAT
Waxing
Waxing the vehicle will help prevent
the adherence of dust and road chemi-
cals to the paintwork. Apply a wax
solution after washing the vehicle, and
apply wax at least once every three
months.
F010D01P-GAT
Polishing
The vehicles should only be polished if
the paintwork has become stained or
lost its luster. Mat-finish parts and
plastic bumpers must not be polished;
polishing these parts will stain them or
damage their finish.
F010E01P-GAT
Wheels
The wheels are painted and, therefore,
require the same care and mainte-
nance as the vehicle body.
F010F01P-GAT
Chrome parts
In order to prevent spots and corrosion
of chrome parts, wash with water, dry
thoroughly, and apply a special protec-
tive coating. This should be done move
frequently in the winter.