Changing The Air Conditioner Filter - Hyundai H-1 2005 Owner's Manual

G140D01HP-GAT
Checking the Compressor Drive
Belt
Gasoline
Auto
tensioner
pulley
COMP. pulley
Generator
pulley
Engine pulley HSM396-1
Diesel (2.5 TCI) Diesel (2.5 CRDi)
Tension
COMP. pulley
pulley
Crankshaft Auto
Crankshaft
pulley tensioner
COMP.
pulley
pulley
G190D01P
When the air conditioning is being
used regularly, the compressor drive
belt tension should be checked at
least once a month.
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm. If you have
the instruments to check it with a
force of 98N (22 lb.), the deflection
should be approx. 8.0 mm (0.315 in.).
If the belt is too loose, have it ad-
justed by your Hyundai dealer.
NOTE:
The compressor drive belt tension
for diesel engine (2.5 CRDi only) is
adjusted automatically.
DO-IT YOURSELF MAINTENANCE
CHANGING THE AIR
CONDITIONER FILTER
B140E01P-AAT
(For Evaporator and Blower Unit)
(Minibus/Van)
The air conditioner filter is located in
the air intake duct behind the wind-
shield washer reservoir.
It helps to decrease pollutants from
entering the car.
1. Open the engine hood.
B140E01P
8
15