Transporting The Machine; Evaporating The Coffee Machine; Packing - Miele CM 5410 Operating Instructions Manual

If you are not going to use the coffee
machine for an extended period of time
and you intend to transport it, e.g. when
moving house, a number of procedures
will need to be carried out:
- Empty and clean the coffee bean
container
- Empty and clean the water container
- Evaporate the coffee machine
- Clean the interior of the machine
- Pack the machine securely
Evaporating the coffee
machine
The coffee machine should be
evaporated before it is stored for a long
period of time or transported any
distance – particularly at temperatures
below freezing.
Evaporating the appliance involves
removing all traces of water from the
system to prevent the risk of water and
frost damage.
 Switch the coffee machine on with
the On/Off  sensor.
 Touch the  sensor.
 Touch the  sensor control twice.
Empty the system?
display.
 Select
Yes and confirm with OK.
 Follow the instructions in the display.
appears in the

Transporting the machine


Danger of burning and scalding
on the dispensing spouts.
Hot steam can cause scalding.
Keep well away from the area
underneath the spouts when hot
liquids or steam are being
dispensed.
Do not touch hot components.
The evaporation process is finished
when
Process finished
display and the display then goes out.
 Switch off the machine and unplug it
to disconnect it from the power
supply.
 Clean the drip tray and waste
container.

Packing

The coffee machine should only be
packed when it is clean and dry.
Residues of coffee grounds can cause
scratches on surfaces. Coffee and milk
residues or water can cause a build-up
of bacteria.
Use the original packaging including
polystyrene blocks to pack the coffee
machine.
Also pack the operating instructions so
that they are available when the coffee
machine is next used.
appears in the
55