Portion Size - Miele CM 5410 Operating Instructions Manual

Portion size

The flavour of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can programme the amount of
water for all coffee drinks and hot water
to suit the size of your cups and the
type of coffee you are using. This does
not alter the amount of coffee used.
For coffee drinks that use milk, you can
not only set the amount of espresso or
coffee, but also the amount of milk or
milk froth to be dispensed with these
drinks. Additionally, you can set the
portion sizes for hot milk and milk froth
alone.
A maximum portion size can be
programmed for each type of drink. The
coffee machine halts preparation of the
coffee once this portion size has been
reached. The maximum possible
portion size is then saved by the
appliance for this type of drink.
If the water container becomes empty
during the preparation of a drink, the
programming of the portion size will
be cancelled. The portion size will not
be saved.
There are two ways of initiating the
programming of the portion size:
- by touching the drink sensor when
you are preparing a coffee, or
- by selecting
Portion size
Parameters menu.
CM 5410, CM 5510, CM 5710: The
changed portion size is always saved
in the current profile. The name of the
current profile is shown in the top left
of the display.
34
Cancelling portion size programming
 Touch the drinks sensor which is lit
Changing the portion size
while making a drink
You can change and save the portion
size for Espresso , Coffee ,
Cappuccino  and Latte macchiato 
while making these drinks.
 Place a cup or glass under the central
 Touch the sensor for the drink you
The desired drink will be made and
will appear in the display.
 When the cup is filled up to the level
If you want to change the portion size
for coffee specialities made with milk,
the ingredients which make up the drink
will be saved one after the other while
the drink is being made.
 When the quantity for each ingredient
in the
The programmed combination of
ingredients and portion sizes will now
be dispensed every time that particular
drink is selected.
up or the  sensor for drinks from
Other drinks .
spout.
want until Change
display.
A signal tone will sound as soon as
portion programming starts. (Provided
that the volume has been set for the
signal tones - see "Volume").
you want, confirm with OK.
reaches the level you want, confirm
with OK.
appears in the
Save