Miele CM 5410 Operating Instructions Manual page 49

 When prompted, place the end of the
milk tube into the right-hand aperture
in the drip tray.
 Confirm with OK.
The milk pipework will now be rinsed.
Cleaning the milk pipework
using the maintenance
programme
For optimal cleaning results, we
recommend the Miele Cleaning agent
for milk pipework. The Cleaning agent
for milk pipework has been specially
developed for use with Miele coffee
machines and prevents subsequent
damage.
It is available to order from the Miele
online shop or directly from Miele (see
the end of this booklet for contact
details).
To clean the milk pipework, 1 sachet of
the Miele Cleaning agent for milk
pipework is required.
The
Clean milk pipework
programme lasts for approx. 5 minutes.
 Touch the  sensor.
maintenance
Cleaning and care
 Select
Maintenance
pipework .
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Confirm with OK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent
the display.
Making a cleaning solution:
 Dissolve the cleaning agent in a
container with 200 ml of lukewarm
water. Stir the solution with a spoon
until the powder has fully dissolved.
Carrying out the cleaning process:
 Place the container next to the
machine and hang the milk tube in
the solution. Make sure it is placed
sufficiently far into the cleaning
solution.
 Confirm with OK.
| Clean milk
appears in
49