Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fortis FSEFBTM360A
Summary of Contents for Fortis FSEFBTM360A
- Page 1 360MM BELT ADJUSTABLE INCLINE ELECTRIC TREADMILL FSEFBTM360A...
- Page 3 SAFETY & WARNINGS 1. Caution To avoid injury, please read this manual carefully before use. For safety purposes, do not stand on the running belt when starting the unit. • Please stop immediately if you feel any nausea or the unit’s motion is no longer •...
- Page 4 3. Caution during use If you do not feel well during exercise, please consult with your doctor. • No liability will be accepted for improper use of the device and any resulting injuries • or damage. Please pull out safety key after use. •...
- Page 5 ASSEMBLY Step 1: Open the package and remove the treadmill and accessory bag. Step 2: Attach the left and right upright tubes to the base frame using the x4 short screws and x4 washers. Note: Do not tighten the screws.
- Page 6 Step 3: Attach the control panel to the upright tubes using the x2 screws and x2 washers. • Tighten all the screws including the x4 from step 2. • Note: Ensure the cables in the upright tube will not be come into contact with the screws.
- Page 7 Step 5: Attach the M16 knob to left upright tube • Attach the running frame to base tube by using the M12 knob. • Step 6: Assembly is complete.
- Page 8 OPERATION Control Panel Press “START”, the machine will start at 0.8km/h after 3 seconds. Press "+" key to speed up and "-" key to slow down. The fastest speed is 10.5km/h and lowest is 0.8km/h. Press the "mode" key, to cycle between the different functions in the following order: Speed, Time, Calorie, and Scan.
- Page 9 TRANSPORTING Fold: Turn the fixed knob then lift the running board to fold the treadmill. • Pull out the tension knob, aimed at the platform then release the knob to fix the • treadmill in place. The treadmill can be moved and stored safely. •...
- Page 10 CLEANING & CARE Always disconnect the unit’s power before performing any maintenance or cleaning. Clean the belt and dial plate using a slightly damp, clean cloth. • Check and tighten the screws and spines at fixing point. • Do not hang clothes or other objects on the machine. •...
- Page 11 Adjusting the Belt 1. If the belt is deviating to the left: Start the machine and adjust to 2-3km/h without loading, use a hex key to tighten • 1/4 of a rotation. Let the unit run without loading for 1-2 minutes. •...
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.
Need help?
Do you have a question about the FSEFBTM360A and is the answer not in the manual?
Questions and answers