Kontron Embedded Computers PCI - 960 User Manual page 78

11. AMI BIOS Configuration
11.7.1.1. DRAM Frequency
The available settings are:
The available settings are: Auto, 400 MHz,-533MHz and 667 MHz .
11.7.1.2. Configure DRAM Timing by SPD
The available settings are: Enabled and Disabled .
11.7.1.3. Memory Hole
In order to improve performance, certain space in memory can be reserved for ISA cards. This memory must be mapped
into the memory space 15MB-16MB.
The available settings are: 15MB-16MB and Disabled .
11.7.1.4. Boot Graphics Adapter Priority
These settings allow you to select the graphics controller used as primary boot device.
The available settings are: IGD, PCI/IGD, PCI/PEG, PEG/IGD and PEG/PCI .
IGD : Integrated Graphics Display
PEG : PCI Express Graphics
PCI : PCI Device
11.7.1.5. Internal Graphics Mode Select
This option allows you to select the amount of system memory used by the internal graphics device.
Available settings are: Enabled, 1MB , / Enabled, 8MB , / Disabled .
If the [ Internal Graphics Mode Select ] option is set to " disabled " the submenu [ Video Function
Configuration ] is not available (refer to the picture below).
11.7.1.6. PEG Port Configuration
11.7.1.7. PEG Port
Available settings are: Disabled and Auto .
11.7.1.8. PEG Force x1
Available settings are: Enabled and Disabled .
76 PCI-960 – User's Manual (V1.02)