Table of Contents
Advertisement
11.5.1.6. Wait For 'F1' If Error
This option specifies if errors detected during the boot time, determine the interruption of the boot procedure.
It is possible to choose between: Enabled and Disabled.
Enabled
The boot procedure is stopped, whenever the BIOS detect an error. The system waits for a user
input.
Disabled
The boot procedure will be not halted for any error that may be detected.
11.5.1.7. Hit 'DEL' Message Display
This option allows you to modify the setting for "Hit 'DEL' Message Display".
It is possible to choose between: Enabled and Disabled.
Enabled
This setting allows the system to display:
during memory initialization.
If "Quiet Boot" option is enabled, the Hit 'DEL' message will not be displayed.
Disabled
This setting prevents the system to display:
during memory initialization.
If "Quiet Boot" option is enabled, the Hit 'DEL' message will not be displayed.
11.5.1.8. Interrupt 19 Capture
Set this value to allow option ROMs such as network controllers to trap BIOS interrupt 19.
It is possible to choose between: Enabled and Disabled.
The BIOS allows option ROMs to trap interrupt 19.
Enabled
Disabled
The BIOS prevents option ROMs from trapping interrupt 19.
11.5.1.9. Network Boot
This option allows you to disable the network boot function or to select the corresponding Ethernet Controller for Network
Boot.
It is possible to choose between: Disabled, 1. Ethernet Port, 2. Ethernet Port and 3. Ethernet Port .
PCI-960 – User's Manual (V1.02)
Hit Del to enter Setup
Hit Del to enter Setup
11. AMI BIOS Configuration
69
Advertisement
Table of Contents
