Kontron Embedded Computers PCI - 960 User Manual page 62

11. AMI BIOS Configuration
11.3.10.4. Flow Control
Flow Control lets computers (host and client) tell each other when they can accept more data for transmission and when
to wait. This handshaking prevents data from being lost because one computer was busy.
The available settings are: None, Hardware and Software .
11.3.10.5. Redirection After BIOS POST
This option allows you to select when the console redirection will be used.
Always Redirection is always active. (Some OSs may not work if this setting is chosen).
Boot Loader Redirection is active during POST and during Boot Loader.
Disabled Turns off the redirection after POST.
11.3.10.6. Terminal Type
This option allows you to select the target terminal type.
The available settings (industry standard terminal protocol) are:
ANSI, VT 100 and VT-UTF8 .
11.3.10.7. VT-VTF8 Combo Key Support
This option allows you to enable or disable the VT-UTF8 Combo Key Support for ANSI/VT 100 terminals.
It is possible to choose between: Enabled and Disabled .
Client and target systems must have the same settings for a working communication.
11.3.10.8. Sredir Memory Display Delay
This option allows you to pause for the memory display during redirection for the set value.
Available settings are: No Delay, Delay 1 Sec, Delay 2 Sec and Delay 4 Sec .
60 PCI-960 – User's Manual (V1.02)