Kontron Embedded Computers PCI - 960 User Manual page 13

7.1.1.12. Multifunction Connector
• One hard drive activity LED for all IDE devices
• Power LED
• Keyboard & Mouse
• Reset switch
7.1.1.13. Connector for Power Buttons
• 2-pin connector for additional power button
Power Button Control:
If an ATX power supply is used, the SBC can control it either through:
❏ the backplane via PICMG 1.3 edge connector or,
❏ its additional power button connector (J34) or,
❏ the jumper for power button configuration (JP1) or,
❏ the hardware monitor connector (J17) power button (PWRBT#) input.
7.1.1.14. MiniPCI-Interface
Single MiniPCI Type IIIA connector
• 3.3 V / 5V (Mini PCI card must be 5 V tolerant)
• The additional USB signals on reserved pins for bluetooth are not supported
7.1.1.15. PICMG PCI -Interface
32-bit/33 MHz PCI-Interface according to PCI Specification v2.3
• Supports 5V PCI backplanes
• Support for up to four PCI-masters
7.1.1.16. LAN
Two REALTEK 8111B Gigabit Ethernet Controllers for PCI Express x1 interface
• Two RJ45 connector on I/O panel with integrated LEDs
• Configurable 48 KB deep buffer
• Wake-on LAN (WOL) power management support
• Package: 64-pin QFN
One REALTEK 8110S Gigabit Ethernet Controller for PCI 32bit, 33MHz
• Routed to the PICMG1.3 edge connector
• Wake-on LAN (WOL) power management support
7.1.1.17. Audio
Realtek ALC655, AC'97 2.3 Audio Codec
• Available on boxed header on board for Line-In, Line-Out, Microphone
• ATAPI-style CD-ROM audio connector (CD-IN)
• SPDIF-In and SPDIF-Out header for coaxial and/or optical fiber connection via an adapter cable with slot mounting
bracket (not included)
• A 47 Ohm inductive speaker is mounted on the board
PCI-960 – User's Manual (V1.02)
7. Features
11