Kontron Embedded Computers PCI - 960 User Manual page 65

USB Mass Storage Device Configuration
11.3.12.5. USB Mass Storage Reset Delay
This option specifies amount of time the BIOS USB code should wait after issuing a reset to the USB mass storage
devices (only needed for slow starting devices).
It is possible to choose between: 10 Sec, 20 Sec, 30 Sec, and 40 Sec.
11.3.12.6. Emulation Type
This option specifies the type of emulation provided by the BIOS for the device.
It is possible to choose between: Auto, Hard Disk, CD-ROM, Floppy and Forced FDD.
Auto When this option is selected, the BIOS detect the current formatted media.
Hard Disk This option allows the device to be emulated as hard disk.
CD-ROM This option allows the device to be emulated as a CD-ROM (if the block size of the media is greater
than 512 bytes).
Floppy This option allows the device to be emulated as floppy drive.
Forced FDD This option allows a hard disk image to be connected as a floppy image.
PCI-960 – User's Manual (V1.02)
11. AMI BIOS Configuration
63