Kontron Embedded Computers PCI - 960 User Manual page 58

11. AMI BIOS Configuration
11.3.6.7. AMI OEMB table
This option allows you to include the OEMB table pointer to R(X)SDT pointer list.
It is possible to choose between : Enabled and Disabled .
Enabled This setting enables adding an OEMB table.
Disabled This setting disables adding an OEMB table.
OEMB table is used to pass POST data to the AML code during ACPI O/S operation. It is required for
proper functionality.
11.3.6.8. Headless mode
This option is used to update the ACPI FACP table to indicate headless operations.
It is possible to choose between: Enabled and Disabled.
Enabled This option enables updating the ACPI FACP table to indicate headless operation.
Disabled This option disables updating the ACPI FACP table to indicate headless operation.
Chipset ACPI Configuration (South Bridge)
11.3.6.9. APIC ACPI SCI IRQ
This option allows you to enable or disable the APIC ACPI IRQ function.
Available settings: Enabled and Disabled .
11.3.6.10. USB Device Wakeup From S3/S4
This option allows you to enable or disable the wakeup function from the S3/S4 state.
Available settings: Enabled and Disabled .
11.3.6.11. High Performance Event Timer
This option allows you to enable or disable the HPET (High Performance Event Timer).
Available settings: Enabled and Disabled .
11.3.6.12. HPET Memory Address
This option is available only if the [High Performance Event Timer] is set to " Enabled ".
Available settings: FED00000h / FED01000h / FED02000h and FED03000h.
56 PCI-960 – User's Manual (V1.02)