Cradlepoint MBR1200 Product Manual page 71

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT
"PUSH BUTTON" Option
Welcome to the Add Wireless Device Wizard. Click Next.
Step 1: Select Configuration Method for Your Wireless Network. Choose
configuration method that your wireless device is capable of supporting (refer
to the documentation that came with your wireless adapter).
Select Push Button. Select this option if your wireless device supports push
button. (PIN instructions in previous section) Click Next.
Click Next
Step 2: Connect Your Wireless Device. Push the button on your wireless
device, then click on the Connect button.
When you use the push button method, the MBR1200 and another WPS
device will enter their "discoverable" mode and find each other to set up a
connection and security.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 69