Info - Cradlepoint MBR1200 Product Manual

MBR1200| USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT

6.1 Info

This page displays information about any attached phones or modems. The amount of information displayed depends on the particular
phone/modem, but generally from a dozen to two dozen values are displayed. To understand what particular values such as "Home Address" or
"Network Access Identifier" mean, please review information provided by your carrier. Of particular interest are the Signal Strength readings, these
let you know the quality of the attached phone/modem connection to your carrier. You may be able to move the location of the router or modem to
increase your Signal Strength. Please note that if any of the values are displayed in red, you will need to correct the condition before you can
access the WAN link across that phone/modem.
If your phone/modem does not support reading diagnostics
such as Signal Strength while it is connected to the
carrier's network, a "Refresh" button will show up on the
page. If you press this button, any current data connection
will be terminated, new readings will be presented, and a
new data connection will be made. This is equivalent to
pressing the router's external Signal Strength (SGNL)
button. Again, note that the data connection will be lost
and any attached devices will be momentarily interrupted if
they are accessing the WAN using the phone/modem.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 73