Establish a wireless internet connection as shown below.
3.2 Wired Connection Using Cable/DSL Internet
Service
Connect the Power Supply
Insert one end of your Ethernet cable to the WAN port.
Insert the other end of the Ethernet cable into your Cable or DSL
modem. It may take a minute or two for the MBR1200 to
initialize.
Open your web browser.
You can now access the Internet.
For Failover/Failback Functionality, you must have an Active Data
Modem attached to the MBR1200.
CradlePoint recommends that Wi-Fi security be setup at this point. See
Setting Up Wireless Network Security
1
Data Modem Not Included. This Product Requires an Activated Data Modem or Phone with Data Plan for Full Functionality. See you Cellular/3G/4G Service Provider for Details