System Check (Ping Test) - Cradlepoint MBR1200 Product Manual

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT

7.11 System Check (Ping Test)

Use the System Check sub-menu as a diagnostic tool to check
connectivity from the router to another computer. This function can
be used to verify a working connection across the WAN network or
the local network. NOTE: the ping target must be configured to
respond to ICMP ping requests.
Ping Test
7.11.1
Host Name or IP Address. Enter either the IP address of the target
computer or enter its fully qualified domain name.

Ping. Start Pinging the specified host

Stop. The host is pinged repeatedly until you click the Stop button.
Ping Result
7.11.2
Displays the results of the ping test. The ping test is an ICMP echo protocol. It‟s used to test response and path to a remote computer system,
i.e., a ping to a URL "www.xxxxx.com" will tell you if there is a path and if the remote computer is responding. NOTE: Not all devices respond to
pings.
Example:

Host Name or IP Address:
www.whitehouse.gov

Ping Result
Please wait, resolving www.whitehouse.gov....
Resolved to 205.161.7.102.
Response from 205.161.7.102 received in 7 milliseconds.
Response from 205.161.7.102 received in 6 milliseconds.
Response from 205.161.7.102 received in 7 milliseconds.
User stopped ping.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 102