Managed Services - Cradlepoint MBR1200 Product Manual

MBR1200 | USER MANUAL Firmware ver. 1.6.12
CRADLEPOINT

7.6 Managed Services

Use the Managed Services sub-menus to securely control your
routers from anywhere on the Internet. You can manage their
configuration, change their f/w, monitor their status and view their
stored logs from any Internet-connected web browser. When this
feature is enabled the router will automatically attempt to contact the
management server whenever its WAN link comes up. All session
management is done over the WAN link using an SSL-secured
connection.
In order for the router to establish a session it must be registered
with the server. Contact CradlePoint for details on how to create an
account.
Enable Managed Services. Tell the router to attempt to establish a
management session over the active WAN link.
Ethernet Only. A management session can involve non-trivial
amounts of data transfer, especially for f/w upgrades. Since many modem plans impose data limits you may want to disable managed services
when the modem is the primary WAN interface. By checking this box you ensure that the router will only establish a management session when
Ethernet is the primary WAN link.
Session Retry. If a router is not yet registered with the server it will periodically retry to establish a session. This setting controls how long it will
wait between retry attempts.
Registration URL. If you have contacted Cradlepoint about registering your router, you may have received an email with a URL link. Paste that
link here, and the next time your router fails to start a session it will register via this link.
When you are done editing the settings, you must click the Save Settings button at the top of the page to make the changes effective and
permanent.
© 2010 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 96