Deagostini MODEL SPACE Honda CB750 FOUR Assembly Manual
Pack 23
Hide thumbs
Also See for MODEL SPACE Honda CB750 FOUR:
- Assembly manual (16 pages) ,
- Assembly manual (16 pages) ,
- Assembly manual (16 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Deagostini MODEL SPACE Honda CB750 FOUR
Summary of Contents for Deagostini MODEL SPACE Honda CB750 FOUR
- Page 1 BUILD YOUR OWN Pack 23...
-
Page 2: Assembly Guide
CONTENTS Assembly Guide Stage 73: Test the electronics, and fit the side stand and footrests Stage 74: The left pillion footrest Stage 75: The right pillion footrest Stage 76: The seat base Editorial and design by Continuo Creative, 39-41 North Road, London N7 9DP. Published in the UK by De Agostini UK Ltd, Battersea Studios 2, 82 Silverthorne Road, London SW8 3HE. - Page 3 Honda CB750 FOUR: Assembly Guide Stage 73 Test the Preparing the electronics electronics, and fit the side stand and footrests Remove the ignition key from the Remove the cover from the battery box ignition before fitting any batteries. on top of the frame. Your parts Side stand pivot Side stand...
- Page 4 Honda CB750 FOUR: Assembly Guide Checking the lights and sounds The interactive functions of the model will be tested over the following pages. If any of them do not work, refer to the If you need to remove a assembly steps to check the connector, carefully open connections.
- Page 5 Honda CB750 FOUR: Assembly Guide The brake light The horn Push the brake pedal down The knob at the right-hand end of the To activate the horn, press the button display base control panel adjusts the below the left-hand slider. Turn the headlight on (use either the ‘L’...
- Page 6 Honda CB750 FOUR: Assembly Guide Fixing the fuel tank Once you have verified that the parts work without any problems, return the sliders and ignition switch to their ‘off’ positions. If any of the functions aren’t working properly, make sure that the sliders and the switch are off, then work through the relevant assembly steps to rectify the problem.
- Page 7 Honda CB750 FOUR: Assembly Guide Insert a type A screw (Stage 68) into the indicated Tighten the screw into place. hole in the side of the fuel tank. This hole is aligned with the hole in the mounting post behind it (inset, red circle).
- Page 8 Honda CB750 FOUR: Assembly Guide Fixing and adjusting the indicators, shock absorbers and rear fender The indicators The shock absorbers Remove the indicators, and use a toothpick to place a small amount of multi-purpose adhesive to the insides of Remove the screw holding the shock absorber in place. the indicator mounting holes.
- Page 9 Honda CB750 FOUR: Assembly Guide The side stand and footrests Line up the ring end of the side stand spring with the The forked end of the side stand fits over the lug on the hook on the side stand, as shown. left side of the model, below the gearchange pedal.
- Page 10 Honda CB750 FOUR: Assembly Guide Pass a type N screw through the free end of the spring. Tighten the screw into the hole until the spring is in contact with the frame lug. Insert the end of the screw into the indicated hole. Swivel the side stand up and down to check that it is Push the footrest fully into the rubber.
- Page 11 Honda CB750 FOUR: Assembly Guide Locate the indicated hole in the left-hand side of the frame. Line up the shaped end of the footrest with the shape of the hole. The two assembled footrests are identical. Push the footrest into the hole. Stage complete Move the brake pedal and oil hose out of the way, and push the footrest into the hole.
- Page 12 Honda CB750 FOUR: Assembly Guide Stage 74 The left pillion footrest Place the left and right screw hole covers in front of you, as shown, with the letters ‘L’ and ‘R’ the right way up. Locate the Locate the screw hole behind the front cutouts (green lines).
- Page 13 Honda CB750 FOUR: Assembly Guide Repeat Steps 2 to 4 to fit the screw Push the footrest fully into the rubber. hole cover to the hole behind the front right indicator. Take the pillion footrest and the pillion Line up the exposed end of the pillion footrest rubber, and line up the flat side footrest with the open side of the pillion of the thin end of the footrest with the...
- Page 14 Honda CB750 FOUR: Assembly Guide Swivel the footrest up and down, as indicated above, to Insert a type P screw into the hole in the bracket. check that it is free to move. Align the hole in the pillion footrest bracket with the hole in the silencer.
- Page 15 Honda CB750 FOUR: Assembly Guide Restoring the tyre colour Tools Over time, the front and rear tyres may gather dust and take on a whitish appearance. To restore them to their original colour, Silicone-based oil spray Brush follow the steps below: these steps show the front tyre, but they Newspaper Paper towel also apply to the rear tyre.
- Page 16 Honda CB750 FOUR: Assembly Guide Stage 75 The right pillion footrest Take the pillion footrest and the pillion footrest rubber, and line up the flat side of the thin end of the footrest with the Push the footrest fully into the rubber. flat side of the hole in the rubber.
- Page 17 Honda CB750 FOUR: Assembly Guide Insert the pillion footrest pivot into the Swivel the footrest up and down, as hole in the bracket, and push it through indicated above, to check that it is free as far as you can. to move.
- Page 18 Honda CB750 FOUR: Assembly Guide Stage 76 The seat base ype G screw Seat hinge A Seat hinge B Mounting position Mounting position Seat hinge A Seat hinge B Insert a type G screw into the hole Prepare the seat base and seat hinges indicated in seat hinge A.
- Page 19 Honda CB750 FOUR: Assembly Guide Type T screw Fix seat hinge B to the seat base, in the Align the holes in the hinges with those same way that you fitted hinge A. circled in the frame. Adjust the positions of hinges A and B to Place a type T screw into the aligned match those shown above.
- Page 20 Honda CB750 FOUR:...
Need help?
Do you have a question about the MODEL SPACE Honda CB750 FOUR and is the answer not in the manual?
Questions and answers