Table of Contents
Advertisement
REFRIGERATOR MAINTENANCE
GAS FLAME APPEARANCE:
While in GAS operation, examine the appearance of the gas flame:
• Turn the temperature switch to the COLDEST position.
• Open the lower intake vent.
I
CAUTION: The burner box cover can be hot. Wear gloves to avoid burns.
• Open the burner box door and look at the gas flame.
• The flame should be a darker blue inside and a lighter blue outside and should be a
constant and steady shape.
• If the flame is yellow or has an erratic and unstable shape, contact your dealer or
authorized service center.
• Make sure the flame does not touch the inside of the flue tube.
• If the flame touches the inside of the flue tube, contact your dealer or authorized service
center.
• Close the burner box door.
REFRIGERATOR FUSE REPLACEMENT
The electrical circuits of this refrigerator have fuses to protect them from an overload. If a fuse is
unserviceable, replace it as follows.
I
WARNING: Do not operate the refrigerator without the power board cover on the
refrigerator. To prevent a circuit overload and a possible electrical fire, use only these
fuses:
DC control circuit
AC circuit
1. Push the selector switch to the OFF position to shut down the refrigerator.
2. Remove the black AC power cord from the receptacle.
3. Remove the AC power cord from the power board that is at the rear of the refrigerator.
4. Remove the DC power supply wires from the power board.
5. Remove the ignition sense wire from the power board.
6. Remove the gas valve wires from the power board.
7. Remove the mounting screws and the power board cover.
8. Replace the unservicable fuse(s) with the new fuse(s) of the correct type and size.
9. Reverse this procedure and assemble the power board cover and all wiring.
If the fuse(s) continues to become unservicable, consult your dealer or a Norcold authorized service
center.
Care and Maintenance
5 amp tan blade type automotive fuse
5 amp glass cartridge fuse
91
Advertisement
Table of Contents
