Jayco Greyhawk Owner's Manual page 31

Install the transit bars and tie down strap (if applicable) and take the unit to a Jayco dealer for
service.
ROTATE TO
RELEASE BRAKE
I
WARNING: When the slideout motor brake is released the slideout will not lock into
place, and therefore it will not be sealed from the outdoors! When the slideout has
been retracted, be sure to install the transit bars and the tie down strap (if applicable)
and return the break release lever to its downward position in order to seal and lock
the slideout.
I
WARNING: For models with a slideout front facing dinette seat, confirm that the tie
down strap is installed correctly prior to travel.
ELECTRICAL WIRING INFORMATION
This diagram (Fig.
provides the electric layout of
the slideout system switch.
Refer to this drawing when
troubleshooting the
slideout system. Repairs to the
electric slideout should only be
performed by a
electrician or Independent Jayco
dealer.
Operating and Using Your Type C Motorhome
MAIN ROOM MOTOR
BEDROOM MOTOR WITHOUT BRAKE LEVER
Fig. 3-11
3-12)
FRONT
IN
electric
OUT
qualified
10 GAGE RED
BEDROOM / MOTORHOME MOTOR
WITH BRAKE LEVER
ROTATE TO
RELEASE BRAKE
SINGLE SWITCH
ASSEMBLY
BACK
BRAKE
RELEASE
LEVER
BLACK
RED
SLIDE-OUT
MOTOR
Fig. 3-12
STEEL CRIMP
SLEEVE WITH
WRAP CAPS
10 GAGE
BLACK
10 GAGE WHITE
+ BLACK (POSITIVE)
- RED (GROUND)
(SLIDE-OUT MOVES IN)
23