Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 25 Expert Mode > WAN > NAT > General
L ABEL
NAT & Port Forwarding
Network Address
Translation (NAT)
Server Setup
Default Server
Change To Server
Port Forwarding Rule
Enable Port
Forwarding
No.
Name
Protocol
External Port
Server IP Address
Internal Port
Actions
Apply
Cancel
9.5.1 Add Po rt Fo rwa rding Rule Sc re e n
Use this screen to configure your NBG6818's port forwarding settings to forward incoming service
requests to the servers on your local network. Click
to show the following screen.
Chapter 9 WAN
DESC RIPT IO N
Network Address Translation (NAT) allows the translation of an Internet protocol address used
within one network (for example a private IP address used in a local network) to a different IP
address known within another network (for example a public IP address used on the
Internet).
Select
to activate NAT. Select
Ena b le
You can decide whether you want to use the default server or specify a server manually. In
addition to the servers for specified services, NAT supports a default server. A default server
receives packets from ports that are not specified in the port forwarding summary table
below.
Select this to use the default server.
Select this and manually enter the server's IP address.
Select
to allow port forwarding. Otherwise, select
Ena b le
This number uniquely identifies the port forwarding rule.
This field displays a name to identify this rule.
This is the transport layer protocol used for the service.
This is the port number used to connect to this service using the router's external IP address on
the WAN.
This field displays the internal IP address of the server.
This is the port number used to connect to this service using the server's internal IP address on
the LAN.
Click the icons under
Ac tio ns
Click
to delete the rule.
Click
to edit the rule.
Click
to save your changes back to the NBG6818.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
NBG6818 User's Guide
89
to turn it off.
Disa b le
Disa b le
to delete or edit a port forwarding rule.
>
>
Se tting s
Inte rne t
NAT & Po rt Fo rwa rding
.
>
Add Rule
Advertisement
Table of Contents
