Table of Contents
Advertisement
Table 12 OpenVPN Server
L ABEL
Server Port
VPN Subnet/ Netmask
Advertise DNS to Clients
Key Setting
Export Config
Apply
Cancel
8.3.2 O pe nVPN Ac c o unt Sc re e n
Use the
O pe nVPN Ac c o unt L ist
Use the
O pe nVPN Ac c o unt Sta tus
the NBG6818 OpenVPN server
Note: At the time of writing, up to 16 OpenVPN clients can connect to the NBG6818
OpenVPN server at the same time.
OpenVPN Account
Fig ure 26
Chapter 8 Applications
DESC RIPT IO N
The default server port number is 1194. You can change it if needed. However,
clients connected to this OpenVPN Server account will have to use the same port
number in order to access the server account.
The fields define the network form which OpenVPN clients can connect to the
NBG6818 OpenVPN server.
Enter an IPv4 address and subnet mask.
Select
if you want the NBG6818 to broadcast its OpenVPN server to
Ena b le
OpenVPN clients in its VPN network defined previously.
Click the
button if you want to change the key your clients use to
C ha ng e Ke y
access to your OpenVPN Server account.
You do not need to click Change Key the first time to configure this screen.
Periodically changing the key is recommended, but you must export the new .opvn
configuration file and send it to all OpenVPN clients so that they can they use the
new key.
Click
to export your configuration to an .ovpn file that OpenVPN
Expo rt C o nfig
clients need to connect to the NBG6818 OpenVPN server.
Click
to save your changes back to the NBG6818.
Apply
Click
to begin configuring this screen afresh.
C a nc e l
screen to view the basic information of the NBG6818 OpenVPN server.
screen to view the basic information of clients that are connected to
NBG6818 User's Guide
63
Advertisement
Table of Contents
