Desk Mounting; Wall Mounting - ZyXEL Communications ARMOR G1 NBG6818 User Manual

Rear Panel
Fig ure 5
1.8 De sk Mo unting
Place the side of the NBG6818 with rubber feet carefully on the desk.
1.9 Wa ll Mo unting
You may need screw anchors if mounting on a concrete or brick wall.
Table 2 Wall Mounting Information
Distance between holes
M4 Screws
Screw anchors (optional)
Screw Specifications
Fig ure 6
Select a position free of obstructions on a wall strong enough to hold the weight of the device.
1
Mark two holes on the wall at the appropriate distance apart for the screws.
2
Be c a re ful to a vo id da m a g ing pipe s o r c a b le s lo c a te d inside the wa ll whe n
drilling ho le s fo r the sc re ws.
If using screw anchors, drill two holes for the screw anchors into the wall. Push the anchors into the full
3
depth of the holes, then insert the screws into the anchors. Do not insert the screws all the way in - leave
a small gap of about 0.5 cm.
If not using screw anchors, use a screwdriver to insert the screws into the wall. Do not insert the screws all
the way in - leave a gap of about 0.5 cm.
Chapter 1 Introduction
10.50 cm
Two
Two
NBG6818 User's Guide
15