Carrier WTC-RCI Installation Instructions Manual page 5

Connector and jumpers
The WTC Room Control Interfaces have the
following onsite configurable jumpers.
PIR LED
Local Area Network
Type Jumper
Figure 4: Connector and jumper locations
(Not applicable to LAN switch)
Pass-Through Subnetwork
RJ-45 Connectors
Subnetwork End of Line
Local Area Network
Access Jack
PIR LED
Enabled
Applicable to RCIs with motion detection only
(WTC-RCI-DM/-DCM)
Subnetwork End of Line
Enabled Disabled
Local Area Network Type Jumper
BACnet LonWorks
Disabled
5