Maintenance And Care; Cleaning The Filters; Cleaning The Spray Arms - Bauknecht GSXPX384A3 Instruction Manual

C. MAINTENANCE & CARE
For hygienic reasons it is recommended to run a high-temperature cycle (e.g. Intensive) at least once per month. It
will help to keep the appliance clean, fully functional and avoid odours.

CLEANING THE FILTERS

Check filters and clean if necessary.
Unscrew microfilter (1),
remove it (2) and remove
fine sieve (3).

CLEANING THE SPRAY ARMS

Unscrew and Unscrew and remove
remove upper arm. lower arm.
WHAT TO DO IF
If fault occurs, before contacting the After-sales Service, make the following checks to try and remedy the problem.
Most faults can be remedied by taking the following action, quickly restoring normal appliance operation.
The appliance...
Display shows:
Display shows:
... is not working/will not start.
Rinse under running
water...
Clean spray nozzles
under running water
(use toothpicks if
necessary)
Possible causes...
Salt reservoir is empty.
Rinse aid dispenser is empty.
The appliance must be switched on. Check the household circuit fuse if
The appliance door doesn't close.
"Delay" option is ON.
Insert
Insert and screw on upper and
lower arms tightly.
Solutions...
Refill reservoir with salt.
Adjust water hardness.
Refill dispenser with rinse aid.
there is no power supply.
Check if the appliance door is
closed.
Check whether the "Delay" option
17
Screw on microfilter