CONTROL PANEL DESCRIPTION
A. Program selection button
B. Multizone button
C. PowerClean® / Keylock (press 3 sec.)
D. PowerDry® / Settings (press 3 sec.)
E1. Display – options area
* The location of some symbols may vary depending on the
dishwasher model.
FIRST TIME USE
After connecting the appliance to the power supply, the device must be programmed. The display will guide the
user to set up the appliance for first use.
1. The Language Selection
2. Setting the Water Hardness
Detergent
When using Powder or Gel you must add regeneration salt and set up water hardness level as indicated in
the table below.
Also, when using Tablets which include salt functionality you must still add regeneration salt.
1. Ask your water supply company what the water hardness is...
German
French
degrees °dH
degrees °fH
0-5
To select preferred language please press
button.
After language confirmation, the appliance will go through the settings.
The water hardness is by default set to level 4. To change water
hardness level, press
To confirm your choice press
according to the table below.
English
degrees °eH
0-9
0-6.3
E2. Display – information area
E3. Display – status area
F. Delay
G. Cancel/ Reset (drain water when pressed 3 sec.)
G. Start/ pause
button repeatedly.
button. The level must be set
2. ... enter this
value on your
dishwasher
Water hardness
Insert value is
level
shown in the
display
Soft
4
button. Confirm pressing
SALT required
1
No