Care and Maintenance
Before cleaning or
carrying out maintenance,
switch off the appliance,
disconnect the mains plug
and turn off the water
tap.
Upper spray arm:
1. Slacken the fixing nut (A) (by
turning it counter-clockwise)
and detach the spray arm (B)
by pulling it down).
2. Rinse the nozzles.
3. To remount the spray arm,
align it and then tighten the
fixing nut (by turning it
clockwise), paying
attention not to bend it.
The fixing nut must be
tightened until it clicks!
Lower spray arm:
1. Slacken the fixing nut (C) (by
turning it counter-clockwise)
and detach the spray arm (D)
by pulling it upwards.
2. Rinse the nozzles.
3. To remount the spray arm,
align it and then tighten the
fixing nut (by turning it
clockwise), paying
attention not to bend it.
The fixing nut must be
tightened until it clicks!
18
Cleaning the outside of
the appliance:
To clean the outside of the
appliance, use a neutral
detergent and a damp cloth.
Clean the control panel with
a damp cloth only.
Do not use abrasive
detergents.
Make sure the spray arm
rotates freely.
Make sure the spray arm
rotates freely.
Cleaning the inside of the
dishwasher:
Regularly wipe the door seal
and inside of the door with a
damp cloth to remove any
food residue.
A
B
D
C