HYOSUNG MONiMAX5100T Operator's Manual page 24

Chapter3. For the beginning operator
3-4
3. When the combination has been correctly entered, the LCD will read "OPr" meaning
"Open right."
4. Turn the dial right (CW) until it stops. The lock's bolt is now retracted and the lock is
open.
5. Turn the handle to the left (CCW) and open the security door.
6. Turn the dial a minimum of one complete rotation to the left (CCW) to extent the
bolt.
<Note!>
After opening and closing any lock, you should always check to ensure that the lock
is physically relocked (i.e., bolt fully extended and locked in place) by turning the
dial to the right. If the bolt does not retract, you can be assured the lock is secured.
Helpful Hint:
At any point while entering the combination during an opening sequence, if you
notice that an incorrect number was pressed on the keypad, you may clear the
© Hyosung TNS Inc. All Rights Reserved.
Operator Manual