Description Of The Inputs And Outputs; Rf Input; Ts-Asi Input / Output; Usb Port - Promax TV EXPLORER HD ISDB-T Manual

USER'S MANUAL. TV EXPLORER

6 DESCRIPTION OF THE INPUTS AND OUTPUTS

6.1

RF input

The RF input is through the RF
signal level should never exceed 130 dBµV.
6.2

TS-ASI Input / Output

The TS-ASI input / output signals works through the connectors
[43] (output) at the rear panel.
6.3

USB port

The TV EXPLORER
enables the communication with a PC, and to download dataloggers and channel plans.
Figure 66.- "USB On-the-go" connector in rear panel. External view.
The "USB On-the-go" makes it possible for two USB devices to communicate with
each other without requiring a separate USB host. In practice, one of the USB devices
acts as a host for the other device.
6.4

HDMI Conector (High-Definition Multimedia-Interface)

HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for
transmitting uncompressed digital data. HDMI supports, on a single cable, any TV or PC
video format, including standard, enhanced, and high-definition video; up to 8 channels
of digital audio; and a Consumer Electronics Control (CEC) connection. The CEC allows
HDMI devices to control each other when necessary and allows the user to operate
multiple devices with one remote control handset.
Figura 67.- Conector HDMI en panel posterior. Vista externa.
11/2010
HD ISDB-T/T
B
[30] connector on the side panel. The peak
HD ISDB-T/T incorporates an "USB On-the-go" port, which
B
[42] (input),
Page 91