USER'S MANUAL. TV EXPLORER
Press the DiSEqC key
execution mode and to locate the mark cursor on the frequency or channel.
5.24
SatCR function
By means of function SatCR it is possible to control the devices of a TV installation
satellite that are compatible with the SatCR
which allows to concentrate manifold down frequencys (slots) by an only cable. By this
way each user using a slot can tune and decode any signal present in the satellite.
In order to select the SatRC function, press the DiSEqC key
panel, and using the rotary selector
the configuration options that users can modify: slot selection, number of slots, device
address, Frequency sep, pilot signal activation, and finally the frequencies corresponding
to each slot.
When activating the Enable Pilots options, the SatCR device located in the
headend emits a pilot signal with constant level for each down frequency (slot). This
function facilitates the verification and identification for different satellite channels that
are available in the installation. The SatCR technology is being developed and tested in
many countries.
9
SatCR is a trademark of STMicroelectronics.
11/2010
HD
ISDB-T/T
B
[21] on frontal panel in order to quit the commands
9
technology (Satellite Channel Router),
[1] activate the SatRC option. In the display are
Figure 65.- SatCR command screen.
[21] from frontal
Page 89