Promax TV EXPLORER HD ISDB-T Manual page 193

USER'S MANUAL. TV EXPLORER
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector
OSD:ON.
Also the standard MPEG-2 profile is indicated which determines the compression
rate for the digital service decodified, the aspect ratio (4:3), the resolution (horizontal x
vertical) for received video and the picture refreshment frequency rate. In the (OSD:OFF)
mode the information window previously described will appear whenever the rotary
selector is pressed again
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
For it place the field selector, by means of the vertical cursors
field of the active service (e.g. VTV 1 in the following figure) and later press the rotary
selector [1].
The DIGITAL SERVICES menu will appear then with the services available in the
digital Multiplex. Move the vertical cursors
[1] and press it to select the service to visualise on screen.
In the list of available services, a service may appear preceded by a symbol, with
two possible meanings:
(*) Indicates that the service is encrypted.
(#) Indicates that it is an internal service from a provider and it is not
supported.
11/2010
HD ISDB-T/T
B
Figure 59.- Digital channel monitoring.
[6] key will appear the tuning information
[1].
[1] to switch to
[6] key, on the
[6] key or turn the rotary selector
[6] key must
Page 83