Promax TV EXPLORER HD ISDB-T Manual page 192

NOTE:
The symbol
instrument has detected a saturation condition for analogue signals in
the currently channel on tune.
This symbol also appears, when the colour subcarrier signal (Burst)
does not contain information and therefore the images are shown in black
and white.
If it is a digital television signal (DTV) on screen appears, for about some seconds,
the following parameters:
The top data box shows the tuned CHANNEL data: number or satellite name,
frequency, active channel plan and satellite downlink frequency.
The following data box shows the VIDEO data: type of video coding (MPEG-2 or
MPEG-4), video bit rate, profile and level with its resolution and aspect ratio, video
program identifier (VPID) and the TS identifier (TSID).
Next data box contains AUDIO information: type of audio coding (MPEG-1,
MPEG-2 or AC-3), audio bit rate, audio program identifier (APID) and language (e.g.
spa).
The last box located in the same column shows the NETWORK data: network
name and/or satellite orbital position, service name, network identifier (NID) and service
identifier (SID).
On the left column appears the type of DVB signal, a window showing the signal
decoded and finally a data box stating if the emission is encrypted or free (SCRAMB or
FREE), when the service supports interactive TV (MHP, i.e. Multimedia Home Platform)
and when is inserted a CAM module into the TV EXPLORER
indication (CAM) appears.
Page 82
USER'S MANUAL. TV EXPLORER
Figure 58.- Analogue channel monitoring.
in the upper corner of the screen indicates that the
HD ISDB-T/T
B
HD ISDB-T/T the
B
11/2010