Connecting A Computer (Host) To The Tv Explorer; Hd Isdb-T/T (Slave) - Promax TV EXPLORER HD ISDB-T Manual

USER'S MANUAL. TV EXPLORER
Copy Streams to Pendrive
It copies TS files recorded from a service inside the PVR folder of the pendrive.
Normally this is the file that takes up more space and time. For this reason this
option is independent of the copy of the rest of files.
5.19.2

Connecting a computer (host) to the TV EXPLORER

ISDB-T/T
B
To connect a TV EXPLORER
the drivers (if they are not installed yet) you have in the folder USB_DRIVERS, on the
memory support delivered with the instrument. To install drivers follow the steps
described in the manual.
Then you have to install the software NetUpdate3, which is also found in the
memory support delivered with your equipment. It allows connecting the TV EXPLORER
HD ISDB-T/T and to perform various functions such as create and edit plans, update
B
firmware, etc..
Once installed all the necessary software on your computer, connect the
TV EXPLORER HD ISDB-T/T
USB male) delivered with the equipment. After connecting, it appears an incon at the top
of the measurement screen (Figure 55 .-).
Run the program and make the connection with your equipment using the option
"Detect" on the program to access all the available features.
11/2010
HD ISDB-T/T
B
(slave)
HD ISDB-T/T
Figure 54.-
to the computer by using the CC-041 (mini USB male —
B
with a computer, you should install
B
HD
Page 79