Using The Flash; Information Displayed On The Lcd Monitor - Concord Camera 4340z Quick Start Manual

11

USING THE FLASH

Use the flash according to the guidelines below.
Auto
Force On
Force Off
Red-eye reduction, Auto
1. Press the button to switch between flash modes.
• The selected flash mode icon appears on the LCD monitor.
2. Shoot the image.
12

INFORMATION DISPLAYED ON THE LCD MONITOR

The LCD displays information such as the camera settings, remaining image
capacity and shooting date etc.
Shooting Mode
Playback Mode
The camera judges if a flash is required. If the
environment is too dark, the flash will fire.
The flash always fires.
The flash does not fire.
The camera will automatically detect when the
flash is needed and the flash will fire after a short
delay to prevent Red-Eye phenomenon.
Macro
Shooting Mode
Mode
Drive
Flash
Mode
Mode
+0.3
Exposure
White Balance
Metering
Mode
Shake
Battery Status Warning
AF Frame
Current filenumber /
Shooting
total filenumber
Mode
Battery Status
File Number
Compression
Setting
Resolution
Memory Storage Type
Setting
Aperture
Value
Shutter
Speed
Recordable
Images
Memory Storage
Type
Shooting Date
6
Flash icon