Table of Contents
Advertisement
EN
6.
ELECTRICAL CONNECTIONS
that the electrical power is disconnected.
The fan coil units are provided with the follow-
ing controls:
VMF-E0R for UL_R
VMF-E18R for UL_RI
In either case they are located on the right
have to be made directly onto the electronic
circuit board.
The unit must be connected directly to an
circuit.
The fan coil units Omnia UL_R and UL_RI are
supplied with 230V/1/50Hz and earth connec-
tolerance of ±10% of nominal values.
The power supply cable must be of type H07
protected by a conduit or tubing. For exposed
cables use double insulated cables of type
H5VV-F.
All cables must be protected by a conduit or
updates so it is mandatory to refer to those
on the unit.
grams supplied with the unit and shown in
26
All electrical works must be carried out by PERSONNEL WITH THE APPROPRIATE LEGAL QUALIFICA-
The design of the cabling and related components must be carried out by PERSONNEL WITH APPRO-
FUTURE REFERENCE.
-
-
Omnia UL_R/UL_RI 26-36
hydraulic works.
Aermec cod. 6976420_03 15.03
Advertisement
Table of Contents
