Subscribe to Our Youtube Channel
Related Manuals for Elkron C402
Summary of Contents for Elkron C402
- Page 1 C402 / C404 Conventional Fire Detection Control Panel with 2 and 4 zones 0051 DS80SC80-004A LBT80809 Installazione MP508...
- Page 2 In this manual, you may find references and information about products (hardware or software) or services not commercialized yet. These references and information do not imply that the company intends to commercialize these products and services. Elkron is a trademark of URMET S.p.A. All trademarks mentioned in this document belong to the corresponding owners.
-
Page 3: Table Of Contents
TABLE OF CONTENTS ..................................3 GENERAL DESCRIPTION ................................4 INTRODUCTION ................................... 4 NORMS ......................................4 COMMANDS AND INDICATORS ..............................5 KEYPAD ....................................5 INDICATOR LIGHTS (LEDS) ..............................6 ACCESS LEVEL ..................................7 ACCESS LEVEL 1 ................................. 7 ACCESS LEVEL 2 ................................. 7 Utente C402-C404... -
Page 4: General Description
1.1 INTRODUCTION The fire detection control panels C402 and C404 control respectively up to 2 and 4 independent zones with a maximum of 32 devices per zone. Each circuit is considered as an zone and can be included or excluded via a keypad command. -
Page 5: Commands And Indicators
3 is entered. corresponding detection circuit is not power supplied. Includes or excludes the operation of During the password entry procedure, zone 4. When the zone is excluded, the number 4 is entered. corresponding detection circuit is not power supplied. Utente C402-C404... -
Page 6: Indicator Lights (Leds)
The zone is not in a fault line resistor detection circuit in short condition missing in the detection circuit circuit (open circuit) Zone 1 ÷ Zone N Zone 1 ÷ Zone N Non-excluded zone Excluded zone N = 2 (for C402), 4 (for C404) User C402-C404... -
Page 7: Access Level
When a zone is excluded, the corresponding detection circuit is not power supplied. When the intervention is completed, it is recommended to restore the control panel to its regular condition of operation with access level 1, pressing the key and keeping it pressed until the indicator turns off. Utente C402-C404... - Page 8 ELKRON ELKRON is a trademark of URMET S.p.A. Tel. +39 011.3986711 - Fax +39 011.3986703 Via Bologna, 188/C - 10154 Torino (TO) – Italy Milano: Tel. +39 02.334491- Fax +39 02.33449213 www.urmet.com – mail to: info@elkron.it www.elkron.com MADE IN ITALY...
Need help?
Do you have a question about the C402 and is the answer not in the manual?
Questions and answers