Ten-Haaft Oyster Operating Instructions Manual page 19

3. OPERATION OF THE OYSTER® SMART TV
HEARING IMPAIRED ON/OFF (Factory setting "Off")
With the setting "On", subtitles are always displayed automatically, if available. When you first activate this
function, it may be additionally necessary to select the desired subtitle language by means of the button
"SUBT" on the remote control.
FACTORY SETTINGS
Only reasonable if problems have occurred that cannot be solved in another manner.
Resets all settings to the status with which the device was manufactured.
Please note: This will also delete individual programme lists and other settings!
When you activate this function, all settings will have to be made from scratch. Use of this function is only
recommended for experienced users!
NETWORK CONFIGURATION
Enables you to select and configure wired network (LAN) or WiFi network (WLAN). See also item 3.2 on page
15 of these instructions.
HDMI CEC
Enables you to make settings and adjustments that control the interaction between the television and devices
connected via HDMI. To operate an Oyster soundbar on the television, it is compulsory that HDMI CEC and ARC
stay on.
Auto standby and Auto power control whether the television can be switched off or on from connected HDMI
devices.
36
3. OPERATION OF THE OYSTER® SMART TV
NETWORK UPGRADE (software update via the Internet)
Only available when the device is connected to the Internet. This function enables you to download a new
software via the Internet. Please ensure that you are making use of a very stable connection for this! Discon-
nections during the download can lead to major problems. The update requires roughly 100 megabyte of data.
Performing a software update may require the device to be set up again. Any programme lists and settings you
have made yourself will be deleted in the process.
SYSTEM INFORMATION
Provides you with all the information about software and hardware versions, the individual MAC address of
your device and the current IP settings in the network.
WIFI/MIRACAST
You can use this to call up the device's Miracast function. The screen must display "Ready for connection" for
the function to be useable.
37