Sound - Ten-Haaft Oyster Operating Instructions Manual

3. OPERATION OF THE OYSTER® SMART TV
PICTURE MODE:
Standard (delivery condition)
Movie (softer picture, optimised for the best movies look)
Personal (here you can define all parameters according to your own liking)
Dynamic (setting with increased contrast. This makes the picture "harder")
You can quit the drop-down menu with the button
COLOUR TEMPERATURE:
Cold (white tones are rendered rather with a bluish hue)
Normal (delivery condition, neutral effect)
Warm (white tones are rendered rather with a reddish hue)
ATMOSPHERIC NOISE REDUCTION:
Off, low, medium, high, auto
The higher atmospheric noise reduction is set, the "smoother" the picture looks. However, this also means that
fine details will be lost. It is recommended to use the factory setting "Low".
MPEG NOISE SUPPRESSION:
Similar effect as the above-mentioned atmospheric noise suppression. Standard setting is "Low".
DCR "Dynamic Contrast Ratio":
When activated, increases the contrast ratio, depending on the picture content. Standard setting is "Off".
30
.
SETUP
3. OPERATION OF THE OYSTER® SMART TV

SOUND

In this menu you can make different SOUND settings. The following options are available:
SOUND MODE:
Offers different, pre-set settings.
Standard, music, movie, sport, personal
After you have selected the desired mode, you can quit the drop-down menu with the button
BALANCE:
Shifts the volume distribution between left and right speaker.
AUTOMATIC VOLUME: OFF, ON
Reduces the difference in volume between loud and quiet passages.
Surround sound: OFF, surround
Makes available a virtual surround sound
AD selection (AD = audio description): Off, on, volume
For various broadcasts, a spoken description of the picture content is output to a speaker. This is a service for
people with visual impairments.
.
SETUP
31