Preparing The Furniture Panel; Installing The Furniture Panel - Gaggenau 400 Series Assembly Instructions Manual

To secure the appliance, screw the decorative pan-
7.
els onto the mounting brackets.
The groove on the decorative panel should face out-
wards in each case.

Preparing the furniture panel

Requirements
The thickness of the furniture panel is at least.
¡
19 mm.
The width of the furniture panel is 596–590 mm.
¡
The recommended height of the furniture panel is
¡
142–156 mm.
The furniture panel is made of wood or wood-like
¡
material.
The furniture panel has a handle or a recessed grip.
¡
Mark the centre of the top edge of the furniture
▶
panel.

Installing the furniture panel

Requirement: Wear gloves.
Preparing the furniture panel en
Measure the width of the fitted unit and mark the
1.
centre of the intermediate floor.
Use the combination pliers to bend the hooks on
2.
the front panel upwards by 90°.
Mount the front panel on the appliance and push it
3.
downwards as far as it will go.
Check whether the front panel is mounted straight.
4.
13