Gaggenau 400 Series Assembly Instructions Manual page 9

Table of contents
Scope of delivery ......................................................... 9
Unit dimensions ........................................................... 9
Safety clearances......................................................... 9
Safe installation ......................................................... 10
Instructions for the electrical connection ................ 10
Tools ........................................................................... 10
Preparing the appliance............................................. 10
Preparing the units .................................................... 12
Installing the appliance.............................................. 12
Preparing the furniture panel .................................... 13
Installing the furniture panel ..................................... 13
Adjusting the furniture panel .................................... 15
Screwing the furniture panel in tightly ..................... 15
Scope of delivery
After unpacking all parts, check for any damage in
transit and completeness of the delivery.
¡ Appliance
¡ Front panel
¡ Tilt protection (2 pcs)
¡ Wood screw for the tilt protection (4 pcs)
¡ Oil filter
¡ Power cord
¡ Mounting bracket (2 pcs)
¡ Installation aid for the mounting bracket
¡ Wood screws for the angle bracket (4 pcs)
¡ Decorative panel 10.5 mm (2 pcs)
¡ Decorative panel 12.5 mm (2 pcs)
¡ Metric screw (4 pcs)
¡ Threaded sleeve (6 pcs)
¡ Metric screw (6 pcs)
¡ Concave washer (2 pcs)
¡ Adhesive buffers
¡ Double-sided adhesive tape (3 pcs)
Unit dimensions
You will find the dimensions of the appliance here
Safety clearances
Comply with the safety clearances for the appliance.
Installing the appliance under the worktop
If the worktop overlaps with the furniture cavity by too
much, this may lead to collisions with the glass cover
in the vacuum-sealing drawer. Note the maximum pos-
sible dimension.
Scope of delivery en
9