Strapping The Child Into The Zeus Plus - Be Cool Zeus Manual

EN
Installing the seat in the forward facing position,
from 105cm to 125cm:
2a. Press the button (8) to turn the seat.
2b. Turn the seat until you feel it lock into the loading
position ready for the child to be placed in it (perpen­
dicular to the forward racing position).
2e. Press the button (8) again to place the seat in the
forward facing position.
It is important to check that the seat is firmly locked
into place, the screen (12) will indicate if everything
is correct.
With the child place in the seat put the seat belt on
passing it through the guidefl 7). Fasten the seat belt
buckle and make sure the belt is not too loose gently
pulling the diagonal part of the belt before placing the
belt over the childs chest.
30
Check the diagonal belt passing it through the lower
belt guide (18)
3. STRAPPING THE CHILD INTO THE
SEAT
This child restraint system has a loading position
making it easy to place the child in the seat and
adjust the straps to fit correctly.
3a. Turn the seat to the loading position (2b) and
open the harness (5). Move the harness straps to the
sides to place the child in the seat.
3b. Place the straps over the child and fasten the
buckle.
To adjust the headrest (2) pull the lever (1) on the
3c.
top. It should be set to the right position, this means
that the shoulder harness should come out approxi­
mately 1 cm above the child's shoulders.