Mitsubishi MOTORS Outlander Phev Owner's Manual page 356

Tyre repair kit
NOTE
l
When removing and screwing in the valve
insert using the valve remover, turn the
9
valve remover by hand. Using a tool to turn
the valve remover could damage it.
9-10 For emergencies
12. After injecting the sealant, securely fit
the valve remover (E) into the end of the
filler hose (J) to prevent sealant from
leaking from the empty bottle.
13. Pull out the compressor hose (K) from
the side of the tyre compressor, and then
securely attach the hose to the tyre valve
(D).
OGGE14E5
14. Place the compressor (L) with its air
pressure gauge (M) on top.
Pull out the compressor's power cord
(N), insert the plug on the cord into the
accessory socket (O), and then put the
operation mode of the power switch in
ACC. (Refer to "Accessory socket" on
page 8-71.)
Turn ON the compressor switch (P) and
inflate the tyre to the specified pressure.