Mitsubishi MOTORS Outlander Phev Owner's Manual page 145

For information on how to change the aver-
age fuel consumption display setting, refer to
"Changing the function settings" on page
6-16.
NOTE
l The average fuel consumption display can
be reset separately for the auto reset mode
and for the manual reset mode.
l "---" is displayed when the average fuel con-
sumption cannot be measured or when it is
99.9 L/100 km (99.9 miles) or more.
l The initial (default) setting is "Auto reset
mode".
l The average fuel consumption depends on
the driving condition (road condition, driv-
ing behavior, etc.). The displayed fuel con-
sumption may vary from the actual fuel con-
sumption. Treat the fuel consumption dis-
played as just a rough guideline.
l
The memory of the auto reset mode or man-
ual reset mode for the average fuel con-
sumption display is erased if the auxiliary
battery is disconnected.
NOTE
l The display setting can be changed to the
preferred units {km/L, mpg (US), mpg (UK)
or L/100 km}.
Refer to "Changing the function settings" on
page 6-16.
EVHV driving rate display
This displays the ratios of the distance trav-
eled with electric power and the distance
traveled with both electric power and engine
power.
The ratio of the distance traveled with elec-
tric power is displayed with a bar graph
(blue) and in a percentage.
OGGE14E5
Multi information display
Energy flow display
This displays the flow of energy.
E00537500025
A- Engine
B- Drive battery
C- Tyre
Blue arrow- Flow of electric energy
Amber ar- Flow of other energy
row-
Instruments and controls
E00537400024
6
6-15