Select Position Indicator; Electrical Parking Switch - Mitsubishi MOTORS Outlander Phev Owner's Manual

Select Position indicator

Select Position indicator
This indicator displays the selector lever po-
sition in the meter.
When the "B" position is selected, the selec-
ted regenerative brake force position is also
displayed at "B" position.
7
Selector lever positions
"P" PARK
The wheels are locked. When you park your
vehicle, be sure to apply the parking brake
and press the electrical parking switch.
"R" REVERSE
This position is to back up.
7-14 Starting and driving
"N" NEUTRAL
No power is transmitted to the wheels. The
E00636300027
wheels are not locked.
WARNING
l Never move the selector lever to the "N"
(NEUTRAL) position while driving, you
will lose Regenerative braking.
l Always keep your right foot on the brake
pedal when shifting into or out of "N", to
minimize the risk of loss of control.
"D" DRIVE
This position is for normal driving.
"B" REGENERATIVE
BRAKE
This position is for the regenerative braking.
You can adjust the regenerative braking force
up to two levels.
Refer to "Selector lever operation" on page
E00636400031
7-13.
WARNING
l Sudden Regenerative braking may cause
the tyres to skid.
Select this position according to the road
conditions and vehicle speed.
OGGE14E5
CAUTION
l When the capacity of the drive battery is
close to full or when the drive battery tem-
perature is low, the regenerative brake will
become less effective.
• In such case, depress the brake pedal
strongly.

Electrical Parking switch

When you park your vehicle, be sure to apply
the parking brake and press the electrical
parking switch to lock the wheels. The indi-
cator on the switch illuminates in green and
the select position indicator displays "P" on
the information screen in the meter.
E00636600020