Information Window - Datacolor Spyder3 Elite Help Manual

Information Window

Help Index
The Long Answer
The Information Window provides numerical feedback on the process and quality of
the calibration performed.
Luminance
These values show the output luminance values, in candelas per meter squared,
measured on the monitor when full Black and full White sample colors are displayed.
Uncalibrated
The values measured when the monitor is in its uncalibrated state. That is, the
luminance values displayed by the monitor before any adjustment has been performed.
Target
The desired or target values specified by the user. These values can be set in the
Specify Luminance Values screen when Measured Luminance Mode has been
selected.
These values will be displayed to guide the user when they are setting the Black and
White Luminance levels during a Measured Luminance Mode calibration.
The Target values are only displayed and used when Luminance Mode has been set
to Measured.
Calibrated
The values measured when the monitor is in its calibrated state. That is, the
luminance values displayed by the monitor after being adjusted.