・ Control Buttons
・ SDM (Smart Display Module) (Sold separately)
SDM Face Plate
SDM Security Screws
・ Attaching the stylus to the Flex
SDM Installation Procedure:
Unscrew the two security screws using a Phillips head
1.
screwdriver to remove the blank SDM faceplate.
Align the SDM grooves and firmly push the module into
2.
place to ensure it is seated correctly.
3.
Use the screws from step one to secure the SDM Module.
Magnetically attach the stylus to the right/left side of the Flex.
Volume Up
Menu
Volume Down
Microphone Mute/Unmute
Camera Toggle On/Off
Power Button
F L E X Q u i c k G u i d e