Honda DREAM125 2018 Owner's Manual page 57

Removing & Installing Body Components
Screws
Headlight case
Tab
5. Remove the screws.
6. Release the tabs from the slots.
7. Remove the headlight case, then
disconnect the connector A and
connector B.
52
Slot
Slot
Tab
Connector B
Connector A
Screws
Headlight Case
u
#
Installation
Install the parts in the reverse order of
removal.
To install the rearview mirrors.
u
1. Install the mirror adapters.
2. Install the rearview mirrors by turning
counterclockwise until they will no longer
turn.
3. Loosen the rearview mirrors approximately
2 turns.
4. Adjust the rearview mirrors.
5. Tighten the lock nuts and install the rubber
dust covers.