Table of Contents
Advertisement
Personal Monitor System Operation
Basic instructions are described below and shown in Figure 26. For more information, refer
to the Shure PSM900 Personal Wireless Monitor System User Guide.
1� Flip the transmitter POWER switch to ON if it is not already on; ensure the RF switch to
the left of it is OFF at this time.
2� Power on the handheld receiver using the volume knob.
3� Attach the antenna and earphones to the top of the handheld receiver.
4� Flip open the battery cover to expose the control buttons. Press SCAN and the display
will show "SYNC NOW".
Note: Insert new or fully-charged batteries prior to each use, and always have
spares on hand.
5� Hold the bodypack up to the transmitter with the sync IR windows facing each other,
and press the SYNC button on the transmitter. The display will show "SYNC SUCCESS"
when finished.
6� Flip the transmitter RF switch to ON. The blue LED on the receiver should illuminate to
indicate that it is detecting the transmitter.
Figure 26: Optional Personal Stereo Monitor System
5
6
3
2
4
Setup & Operation
16
1
Advertisement
Table of Contents
